PJM tested MPV®-VentuS® of WINDHOFF

WINDHOFF relied on PJM's experience and expertise to test an innovative, modular multi-purpose vehicle within a short time frame.

The German specialist for rail vehicles, railway and shunting technology has developed the next generation of a multi-purpose vehicle. WINDHOFF Bahn- und Anlagentechnik GmbH had commissioned the Austrian system specialist PJM to carry out the test runs for approval on the German rail network. As an accredited test center in accordance with ISO/IEC 17025, PJM carried out vehicle tests in the areas of braking and running characteristics as well as static tests to determine derailment safety and wheelset torsional vibrations.

MPV®-VentuS® is a modular system that can be used to create a wide variety of vehicle configurations. The range of working modules includes various cranes, platforms, contact wire pusher, but also containers or contact wire measuring systems. The power system also has a modular design so that adjustments can be made very easily over the course of the vehicle's service life and, for example, a vehicle that is currently diesel-electric with a generator and electric motor can be converted to all-electric at a later date. The MPV®-VentuS® vehicle family is designed on the basis of DIN EN 14033 and authorized with the European TSI homologation. The MPV®-VentuS® type GAF, which was tested together with PJM in Austria last year, is a track maintenance vehicle for Deutsche Bahn (DB). The vehicle was officially presented at InnoTrans 2024, and in February 2025 Windhoff and DB received authorisation to place the MPV VenuS GAF modular ancillary vehicle on the market. The vehicle is approved on the basis of the European TSI from the 4th railway package.

 ‘It is important to us, to complete our customers’ projects just in time and successfully. For WINDHOFF too, we were able to carry out the vehicle tests and analyses within a short time frame,’ says Martin Joch, CEO of PJ Messtechnik GmbH.

Press release

PJM_Windhoff @Manuel Hanschitz-klein
PJM Tests for Windhoff @Karl Heinz Ferk-klein

New 80ft InnoWaggon Sggns: PJM carried out overall accreditation tests

When it comes to further development or new concepts, rail logistics specialist Innofreight is an important address. Recently, the wagon fleet was expanded by a one-piece 80ft InnoWaggon Sggn. Less wagon weight but more train load were the requirements to make rail transport even more economical and efficient for Innofreight customers. For the overall approval, the company relied on PJM expertise. The various tests were evaluated in several stages:

  • Fatigue strength: The strength tests were carried out by the PJM engineering experts according to EN 12663. Another task of the engineering team was to optimize the strength. The static tests were carried out by means of a mobile pressure frame at the site of MFL Liezen. The buffing impact tests took place mainly in St. Michael, not far from Innofreight's headquarters.
  • Brakes: The static and dynamic tests according to TSI WAG:2020 were also carried out in the St. Michael area. The uncoupling tests were carried out with various loading conditions.
  • Acoustics: The acoustic measurements according to TSI NOI 2014/1204/EU were used to determine pass-by noise, rail roughness and track decay rate.

This project included two novelties:

  • Uncoupling device: For the first time, a new device developed by PJM was used for the suspension tests. The new component has proven itself very well since it is lighter, smaller and easier to operate.
  • Solar energy: The measuring instruments were supplied with energy by means of a solar panel. The panel can be set up in just a few steps and provides sufficient power for the measurement tests in good weather.

Get the full medie release:

https://pjm.co.at/en/wp-content/uploads/sites/2/2023/03/PI-Innofreight-PJM-03-2023-Web-EN.pdf

 

PJM-Innofreight-80ft-kleinPJM-Akustikmessungen-Innofreight-klein

Be up to date with our periodical newsletter

PJ Messtechnik GmbH
PJ Monitoring GmbH

Waagner-Biro-Straße 125
8020 Graz
Austria

Tel.: +43 316 228454
Fax: +43 316 228454-15
[email protected]

© 2025 PJ Messtechnik, PJ Monitoring. All rights reserved

WordPress Cookie Plugin by Real Cookie Banner