EN 50317 - PJM EN

New test area: PJM accredited for pantograph

PJM has expanded its scope as an accredited test center in accordance with ISO/IEC 17025 and now also tests the dynamic interaction between pantograph and overhead contact line. In addition to measurements in accordance with EN 50317, the accreditation also includes simulations in accordance with EN 50318, making PJM the only company in Austria with accreditation for the specialist area of pantographs.

Over the past two years, the Austrian system specialist has invested in the infrastructure of the new department. The pantograph test rig for calibrating the measuring system - as well as the technical equipment for other areas - has been set up at the company's site in Graz. Extensive tests in the wind tunnel have proven that the measuring system is non-reactive. With the existing measuring equipment, tests can be carried out with up to two measuring pantographs, which means that multiple-unit operations can also be realised. The requirements for the interaction between pantographs and the overhead contact line system of the new service jet for ÖBB had been tested in summer (as announced in the media release: https://pjm.co.at/wp-content/uploads/2024/06/PI-PJM-Servicejet-6-2024-DE-Web2.pdf). In the coming weeks, the measurement technology team will be testing another rail vehicle in single and multiple-unit operations.

‘Due to decarbonisation, the focus will be on electric rail vehicles in the future. With its corresponding expertise and infrastructure, PJM is ideally positioned for the new specialist area,’ says Martin Joch, CEO of PJ Messtechnik GmbH. With the new specialist area, PJM offers several advantages for clients, such as the efficient sequence of the various tests for rail vehicles. The expertise in the area of simulations offers particular added value: ‘Simulations significantly minimise the testing effort for multiple tractions. Theoretical calculations allow the large number of variants to be reduced to relevant train combinations, which are then tested in dynamic track tests. This saves valuable time and reduces costs,’ says Martin Joch.

Get more details in the media release

New service jet from Stadler for ÖBB: Dynamic tests and instrumented wheelsets

ÖBB-Infrastruktur AG has procured a new fleet of rescue trains with 18 new service jets from Stadler. The low-emission and multifunctional vehicles will be in operation throughout Austria, travelling at speeds of up to 160 km/h. PJM was commissioned as an accredited test center in accordance with ISO/IEC 17025 for the test runs. The dynamic tests are being carried out in co-operation with the ÖBB mechanical measurement group. PJM was also responsible for the production and development of the instrumented wheelsets. The vehicle tests for the areas of running behavior, brakes, acoustics and pantographs will take place throughout Austria and are expected to be completed in autumn 2024. For unrestricted track access in Austria, the test runs were carried out in test zone 5c, for vehicle authorization for radius curves down to 100 meters. "The instrumented wheelsets were specially developed and manufactured for these specifications in very tight curves. Our wheelsets have proven themselves in the dynamic tests," says Martin Joch, CEO of PJ Messtechnik GmbH.

The new generation of service jets required some innovations in the test runs. "Due to the new standards, these demanding tests were carried out on the ÖBB network for the first time. The results of the test runs are extremely precise and reliable and form a solid basis for evaluating the rail vehicle," says test manager Roman Schmid, ÖBB Produktion GmbH.

Video dynamic tests

Media release