New 80ft InnoWaggon Sggns: PJM carried out overall accreditation tests

When it comes to further development or new concepts, rail logistics specialist Innofreight is an important address. Recently, the wagon fleet was expanded by a one-piece 80ft InnoWaggon Sggn. Less wagon weight but more train load were the requirements to make rail transport even more economical and efficient for Innofreight customers. For the overall approval, the company relied on PJM expertise. The various tests were evaluated in several stages:

  • Fatigue strength: The strength tests were carried out by the PJM engineering experts according to EN 12663. Another task of the engineering team was to optimize the strength. The static tests were carried out by means of a mobile pressure frame at the site of MFL Liezen. The buffing impact tests took place mainly in St. Michael, not far from Innofreight's headquarters.
  • Brakes: The static and dynamic tests according to TSI WAG:2020 were also carried out in the St. Michael area. The uncoupling tests were carried out with various loading conditions.
  • Acoustics: The acoustic measurements according to TSI NOI 2014/1204/EU were used to determine pass-by noise, rail roughness and track decay rate.

This project included two novelties:

  • Uncoupling device: For the first time, a new device developed by PJM was used for the suspension tests. The new component has proven itself very well since it is lighter, smaller and easier to operate.
  • Solar energy: The measuring instruments were supplied with energy by means of a solar panel. The panel can be set up in just a few steps and provides sufficient power for the measurement tests in good weather.

Get the full medie release:

https://pjm.co.at/en/wp-content/uploads/sites/2/2023/03/PI-Innofreight-PJM-03-2023-Web-EN.pdf

 

PJM-Innofreight-80ft-kleinPJM-Akustikmessungen-Innofreight-klein

New loading scheme: 25 % more transportation capacity

As an overall logistics provider, Innofreight develops innovative solutions and thus optimises rail freight transport. One of the latest innovations is the further development of the double wagon IW 90 ft Gigawood to transport log wood and timber. In order to realise new rail freight concepts, Innofreight counts on the engineering and testing expertise of PJM.

Due to the adapted loading scheme of the vehicle, the carrying capacity was increased by 25 %. Thus, more capacity also results in more competitiveness to shift goods traffic from road to rail. 

 

IMG_3863med

Powerful measurement: Impact tests for Innofreight's double container wagon

Physics is a defining factor in our everyday life. Recently, we determined the longitudinal forces and longitudinal acceleration of an 2x 30ft. InnoWaggon of Innofreight. Therefore, the measurements were performed with three different container types: An InnoTainer Coils, a RockTainer and a SlurryTainer to carry so-called lime milk. Lime milk is a mixture of marble, chalk and water used as filling medium and coating pigment in the paper industry. To go into detail, PJM was in charge to measure the force effects on the bumpers, the strength development in the pull rod and in the adapted longitudinal stops of the brackets. The impact tests were performed in Styria.

Innofreight provides innovative, patented rail freight cargo and logistic systems. Among other things, Innofreight is specialised on developing and advancing freight wagons.

Be up to date with our periodical newsletter

PJ Messtechnik GmbH
PJ Monitoring GmbH

Waagner-Biro-Straße 125
8020 Graz
Austria

Tel.: +43 316 228454
Fax: +43 316 228454-15
[email protected]

© 2025 PJ Messtechnik, PJ Monitoring. All rights reserved

WordPress Cookie Plugin by Real Cookie Banner